Ztech Machinery PVC-U Deep Well Drilling Pipe Production Line

Ztech Machinery, which has many years of experience and expert staff on pipe production machines and polymers, offers a turnkey, professional production line offer for the production of 100m, 300m and 500 meters drilling pipes.

The production line is designed according to your desired pipe diameter and depth class options.

1. Weighing, Mixer and Dosing

Ztech Machinery will enable its customers to make professional production; It establishes a system that prepares completely automation-controlled formula and automatically doses it to production lines. 

    2.  Twin Screw Extruder

Ztech Twin Screw Extruders  offer many options depending on your capacity needs and machine features.

Our own production Ztech Reducers are used in Parallel Counter Rotating Double Screw Extruders   . In this way, it offers 100% service warranty assurance to its customers. Ztech Gearboxes, designed to provide high torque and long service life, ensure trouble-free production for many years.

It has screw designs that will ensure the most efficient processing and plasticization of PVC raw material.

• Touch control panel,
• Fault detection and repair with remote access,
• Ability to work synchronously with other machines on the line,
• Ability to produce uninterruptedly for very long periods thanks to the in-panel air conditioning cooling system,
• Specially designed barrier, high speed screws provide the advantage of low energy consumption, high capacity, homogeneous mixing and processing. 
• Automatic self-protection against high torque, pressure and temperature alarms,
• Warning the operator with a light warning in case of alarm

      3. Die Head

Ztech Die Heads,  the molecular structure of the raw material; It has a design that allows the pipe to achieve an alignment that will increase the pressure, elongation, tensile and yield strength values.

Pipes of different diameters and PN values ​​are produced by making pin and spinneret molds according to the desired pipe pressure class and raw material MRS values.

      4. Calibration Sleeve

Ztech Pipe Calibers  are used to cool the hot material coming out of the die head under vacuum to produce the desired outer diameter tolerance. 

       5. Vacuum and Cooling Tank

Ztech Vacuum and Cooling Tanks  cool the pipe with vacuum and cold water so that the outer diameter of the pipe can be calibrated at the desired value. 

Models are offered according to the capacity of the production line and the pipe diameter range options to be produced.

It is made of stainless material to protect against rust and corrosion.

       6. Haul-Off

 Ztech Haul Offs  are used to produce the pipe in the desired wall thickness and speed. Ztech tractors, which can work completely synchronously with the extruder, respond immediately to changes in extruder speed. 

Thanks to its servo-driven motors, it provides a stable pulling speed from the lowest speed to the highest speed.

        7 . Pipe Cutter

Ztech Pipe Cutters  are used to automatically cut the pipe to the desired length.

ZPT saw has been designed especially for beveled cutting in PVC pipes. 

       8 . Tilting Table

It is used to stack the pipe by tilting it to the right or left after cutting.

       9. Cover Mold

In addition to pipe production, our customers who want to produce or have caps fitted to the male end of drill pipes;   We offer  Ztech injection molds .